By clicking “Accept”, you consent to the use of ALL the cookies. Spraying too much poly will produce runs or drips. Because poly is a tricky finish to apply with a paintbrush, but spraying polyurethane with a paint sprayer is quick, easy and gives DIY furniture a factory looking finish. Before we fire up our paint sprayer or pick up any tool for that matter we need to think about safety. amzn_assoc_placement = "adunit0"; If you bend your wrist as you approach the piece and as you move away from the piece you’ll create an arc. I started using Minwax rattle can poly, but I’m frugal (cheapskate) so I thought an airbrushing with poly might do the trick have you heard of it or ever tried it? If you used a water-based stain on your project I would use a water-based poly. Application is Difficult You can get your own paint mixing cheat sheet here. Perhaps finding someone who deals with antiques on a regular basis might be your best bet. There are pros and cons to both wipe-on and brush-on poly. I asked my friend Makayla at HomeRight what products meet those requirements, and she said: “A few brands of polyurethane that are good go-to’s are Minwax, General Finishes, and Varathane.”. My HomeRight Super Finish Max sprayer has three spray patterns which can handle just about any surface where you’ll need to spray polyurethane. document.removeEventListener('mousemove',loadFca46); amzn_assoc_marketplace = "amazon"; However, the links to wipe-on poly or brush-on poly on Amazon are accurate. I use 220 grit sandpaper to lightly sand the poly. wipe-on poly, or brush on poly? Below are just a few ideas how you can use the spray patterns. In all the years I’ve been using a tack cloth I’ve never had that problem, but it’s always possible that it could cause a problem. I’m worried about cleaning products taking the finish off or a wet rag damaging it. Base Coat View our privacy policy and site policies here. It keeps moisture from damaging the wood. Instead of polyurethane I used a DIY finish made with equal parts of gloss spar varnish, boiled linseed oil and paint thinner. We are in the middle-end of our log siding man-cave basement remodel. I felt polyurethane was a finicky finish, that the application was difficult and that it didn’t give me the look I wanted for my DIY furniture projects. And any of those specks of dust that fall into the poly while it was drying will need to be sanded out otherwise your finish won’t be smooth. You can cut in tight corners and paint nice straight lines that are impossible to attain with a sprayer. It is mandatory to procure user consent prior to running these cookies on your website. It’s easy to make and an easy to apply finish that gives furniture a “hand rubbed” look. If you touch an area with your brush where the poly is dry or drying, you’ll pull the finish which could leave bumps when it finally dries. Wipe-on polyurethane is simply standard polyurethane that has been thinned with mineral spirits. I didn’t mind it, but I’ve been smelling model paint spray cans and airplane glue all my life, so I might be comfortably numb. Test it on a scrap piece ahead of time to make sure you like the result! In other words, you must apply a number of coats to build up a film thickness comparable to a … Poly provides a clear, durable finish, but when applied with a brush it can sometimes look like plastic. After all my work on this table I don’t want to ruin it. The only exception is I use paint thinner. They are mixed (or thinned) and are cleaned up with paint thinner. I LOVE Rust-Oleum Ultimate Wood Stains. Don’t shake the can or wipe your brush on the rim of the can because you’ll introduce bubbles into the poly and those bubbles will be transferred to the surface of your furniture project.